Up to approximately 2m2 per litre, per coat, depending upon the nature and absorbency of the surface being painted. 

• Stir thoroughly before and during application.
• Do not thin.
• Apply when air and surface temperatures are 10°C or higher.
• Do not apply if heavy rain is expected within 24 hours.
• Liberally apply the first coat using a thick polyester bristle brush, or by rolling a small section (1m x 1m), and then using a brush to work the coating into the pores of the masonry.
• Apply as much paint as necessary to produce a continuous, pinhole free film.
• Use a 20-25mm nap roller for unpainted, porous surfaces, and an 18mm nap roller for smooth or previously painted surfaces.
• The second coat can be Zinsser® brushed or rolled.
• Do not over spread.
• WATERTITE® is a two coat system; the first coat primes and seals the surface. The topcoat completes the sealing process to ensure protection against water intrusion.

For more application instructions please see Technical Data Sheet.

Immediately after use, clean equipment with good quality brush cleaner.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Ideal for cellars
• Prevents fungal degradation on the paint film for 5 years
• Can be applied to wet or dry walls
• For use on interior or exterior surfaces
• Low odour, solvent based paint