Teknos Timantti 20 Semi Matt Emulsion

7-10m/2 on previously painted surfaces

Preparation:

• Clean the surface from dirt and dust.
• Wash previously painted, dirty surfaces with RENSA SUPER paint cleaner.
• Matt down hard or gloss surfaces by sanding and thereafter remove the dust.
• For smoothing of irregularities in the surface choose a suitable filler from the SILORA series.
• The dried filler is sanded down and the dust removed.

Application:

• HUMID AREAS: Prime concrete, plaster, stopper, brick, and building board surfaces with TIMANTTI W moisture sealer according to the directions for use.
• IN DRY AREAS prime the surfaces previously mentioned with TIMANTTI 3 Primer.
• Steel surfaces are primed with FERREX AQUA Anticorrosive paint.
• Prime galvanized surfaces with TIMANTTI 3 Primer.
• Before use stir the paint thoroughly.
• The paint can be diluted with water, if required, but dilution may impair the coverage of the paint.
• Apply by roller, spray or brush.
• Recommended nozzle size for airless spray is 0.017 - 0.021".

Wash the equipment immediately after use with detergent and warm water.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Mildew resistant 
• Ideal for use in humid spaces 
• Good washability 
• Abrasion resistance