Rustins Quick Dry Coloured Varnish Satin

12-15sq.metres/litre per coat, depending on absorbency of surface.

Preparation:

• Surfaces must be clean and previous coatings should be removed with Rustin’s Strypit Paint and Varnish Stripper.
• It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels.
• Bare wood may be dyed with either Rustin’s Wood Dye before varnishing (see Compatibility section below).

Application:

• Synthetic brush, Varnish Roller or Spray (can be diluted with water about 10% if necessary for spraying, or if the temperature is high).

Coats:

• Three coats are recommended, but as each extra coat will make the colour deeper, if the colour is satisfactory after one or two coats, apply one or more coats of Rustins Clear Acrylic Varnish. 

With water whilst wet. If dried-on, clean equipment and brushes with either Rustin’s Brush Restorer or Rustin’s Strypit Paint & Varnish Remover.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Low odour
• Quick-drying
• Non-yellowing on ageing
• Has very little effect on the colour of wood to which it is applied