Polyvine Exterior Wood Varnish

15 square metres per litre

Preparation:

• All surfaces must be clean and free from dust, dirt, oil and contamination.
• Remove oils/resins from oily hardwoods and resinous softwoods.
• Treat new wood with a wood preservative to remove all traces of fungus and mould.
• Ensure pretreatment is compatible and completely dry, before application.
• Joints, end grain and glazing beads must be completely sealed.
• Water penetration into the timber will produce unsightly water staining and promote fungal growth beneath the clear varnish.
• Instructions in the technical data sheet must be followed.
• Ensure the product is well mixed. 

Application:

• Using a good quality brush, apply evenly using light brush strokes, following the grain of the wood.
• Keep a wet edge and avoid overlaps.
• Apply the first coat and allow to dry.
• On new wood dilute the first coat with 10% water.
• Sand lightly to obtain the best finish.
• Apply three coats.
• To achieve a fully protected dead flat finish apply 3 coats of satin before a final coat of dead flat. 

Caution:

• Always apply to a test area before starting work.
• Care must be taken when applying in high temperature or direct sunlight as this will affect drying time.
• Do not apply when rain is imminent.
• Coating life will be reduced on horizontal surfaces and where the coating is in contact with the ground or pooled water.

• Any equipment used can be cleaned using soap and water before the clear coat dries.
• Wipe any excess off surfaces with a damp cloth.
• Any dried deposits will need a paint stripper to remove them.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Exterior use
• Water resistant
• UV filter protection
• Microporous
• Biocide boost
• Nano technology
• Does not blister or peel