Polyvine Classic Colour Scumble

10-20 square metres per litre

Application:

• Select base coat colour in vinyl silk emulsion/satin latex.
• Apply base coat and allow to dry for a minimum of 24 hours with ventilation.
• Colour your Classic Colour with satin or matt emulsion.
• In warm conditions, above 21°c/70°f or in low humidity mix 6 parts Classic Colour to 1 part emulsion.
• In cold conditions, below 21°c/70°f or in high humidity mix 4 parts to 1 part emulsion.
• Test on a small area of the effect before application.
• Brush or roller the coloured glaze liberally over the base coat.
• Create the desired decorative effect by breaking the surface with a crumpled rag, bag, sponge or a Polyvine tool or brush. 

Caution:

• Always test adhesion and the application of the effect on a trial area before starting.

Clean tools/equipment with warm soapy water, rinse well with clean water, and allow to dry naturally.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Can be used for colourwashing, stippling, ragging/bagging, dragging and sponging
• One hour working time 
• Dries to a translucent finish