Liberon Palette Wood Dye

8-16m²

Preparation:

• Ensure the surface is thoroughly sanded, bare and free from dust.

Application:

• Shake well before use.
• If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour.
• Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush.
• Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour.
• On large surfaces such as floors avoid overlap marks by working a small section at a time.
• A second coat may be applied after 2 hours if a stronger colour is required.
• More than two coats of dye may affect the final finish. 

Important:

Always test product on a spare or inconspicuous area for colour, compatibility and end result.
Different types of wood produce different results. The colour bar may not be a true representation of the actual colour.

Precautions:

• Do not mix a water based dye with a spirit based dye.
• Wear gloves to avoid staining skin.
• Caution must be taken when using water based finishes over Liberon Palette Wood Dye.
• Keep brush strokes to a minimum as over brushing may lift out the colour.
• Do not allow to freeze.

Clean tools using water

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Water based dye for interior wood work
• Suitable for use on floors
• Leaves the grain visible
• Suitable for use on both hard and soft woods
• EN 71 approved – safe for toys
• Can be mixed with Liberon Natural Finish Varnishes