Liberon Liquid Beeswax

Up to 12m² per litre

Preparation:

• Ensure the surface is clean, dry and free from dust, dirt and any other surface contaminants.
• Remove old waxes and dirt with Liberon Wax and Polish Remover if required
• Please Note: In cold weather, the wax may thicken.
• To soften the wax, remove the cap and stand the container in a bowl of hot water for 5 minutes.
• Replace the cap and shake the container.
• Repeat this process if necessary.

Application:

• Always do a test area before starting any project to assess product suitability and final finish.
• Follow the manufacturer's instructions on the container at all times.
• Shake the tin thoroughly before use.
• Apply the liquid beeswax with a lint-free cloth, Liberon Furniture Brush or with a suitable spray system
• Allow to become touch dry for a minimum of 6 hours - Longer if possible
• Buff with a clean cotton cloth or buffing brush
• Repeat the operation on new or very dry wood as it may require two or more coats
• For a better quality finish, apply thin coats of wax and build-up to the desired level of sheen, buffing between coats

The equipment should be cleaned using white spirit.

Aftercare:

-Maintenance:

• Wipe over the surface with a lint-free cloth or duster, then re-apply Liberon Liquid Beeswax as required.

Please Note: Do not wash the finished surface with water, as this can be damaging to the finish.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Nourishes and protects absorbent woods such as pine and oak against dryness
• Ideal for large, dry surfaces such as beams, floors, doors and staircases
• Suitable for use on softwoods and hardwoods
• Can be cloth, brush or spray applied
• Very high V.O.C