Liberon High Resistance Floor Varnish

Coverage of 10-12m2 per/litre.

Preparation:

• Floors to be varnished must be clean, dry and free from dust, dirt or any other surface contaminants prior to varnishing.
• All previous finishes must be removed and the surface stripped back to bare wood by sanding.
• Fill any gaps or imperfections with Liberon Wood Filler or other suitable floor filler.
• Floors should be sanded properly and evenly.
• Floors can be sealed with Liberon Floor Sealer prior to varnishing, if required.
• If desired, floors can be stained prior to varnishing with Liberon Palette Wood Dye or other suitable wood stain.
   

Application:

• Always do a test area before starting any project to assess product suitability and final finish.
• Follow the manufacturer's instructions on the tin at all times.
• Ideal application conditions are between 12°C and 25°C.
• Ensure good ventilation during application and drying.
• Stir the contents of the tin thoroughly before and periodically during use.
• Apply the floor varnish evenly with a brush or a short-hair roller.
• Apply the varnish plank by plank, while facing the sunlight.
• Start in the corner of the room and work back towards the door.
• Allow 6 hours between coats, lightly sanding between coats, if required.
• Liberon recommend that a minimum of 3 coats are applied.
• More coats can be applied for a more durable finish or where foot traffic is particularly heavy.
• Allow the final coat of varnish a minimum of 24 hours drying time before using the floor.
   

Aftercare:

Regular Cleaning:

• Floors treated with Liberon High Resistance Floor Varnish can be cleaned on a daily basis with a soft broom, dry microfibre mop or with a vacuum cleaner.
• For wet cleaning, sweep of vacuum the floor first to remove all traces of surface dirt and grit, then clean with a damp (not wet) microfibre cloth or mop and a dedicated wood floor cleaner.

Maintenance:

• If the floor surface shows signs of wear over time, re-apply a fresh coat of varnish, following the 'preparation' and 'application' instructions above.

Clean equipment using white spirit.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• A highly resistant, solvent-based floor varnish for interior wooden floors
• Ideal for high traffic areas such as hallways, dining rooms, lounges and stairs
• Provides exceptional protection and superior resistance to high foot traffic
• Highly stain and water resistant
• Dries to a durable, non-slip finish
• Low odour
• High V.O.C