Liberon Beeswax Paste

Up to 12m² per litre

Preparation:

• Ensure that surfaces to be waxed are clean, dry and free from dust, dirt and any other surface contaminants.
• Remove old waxes and dirt with Liberon Wax and Polish Remover if required
   

Application:

• Always do a test area before starting any project to assess product suitability and final finish.
• Follow the manufacturer's instructions on the container at all times.
• Apply a coat of Liberon Beeswax Paste sparingly with a soft, lint-free cotton cloth or Ultra Fine (0000) Steel Wool
• Allow to dry for a minimum of 1 hour, then buff with a clean cloth
• Repeat the operation on new or very dry wood, as it may require two or more coats
• For a higher sheen, build-up with thin coats of Beeswax, buffing between coats
• Buff with Liberon Furniture Brush once the last coat has completely dried

Aftercare:

-Maintenance:

• Wipe over with a cloth or duster and re-apply Liberon Beeswax Paste when the surface looks dull and tired.

Please Note: Do not wash the finished surface with water, as this can be damaging to the finish.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• A traditional, solvent-based beeswax paste
• Nourishes and protects absorbent woods such as pine and oak against dryness
• Ideal for interior furniture and other small wooden surfaces
• Suitable for use on softwoods and hardwoods
• Can be applied by brush or with steel wool
• Very high V.O.C