Johnstone’s Trade Stormshield Pliolite® Based Masonry

From £61.99 inc VAT

Available in 5L only

Johnstone’s Trade Stormshield Pliolite® Based Masonry is for exterior use on cement rendering, rough cast, brick and concrete.

Pliolite® Masonry is a high quality, solvent-based paint which provides a smooth matt finish that adheres well to painted surfaces and surfaces that have been appropriately sealed with Johnstone’s Trade Stormshield Stabilising Solution.

It can be applied at temperatures as low as -5°C due to the Pliolite resin, and 20 minutes after application becomes showerproof.

Pliolite® is a registered trademark of Eliokem.

Available ready mixed in Brilliant White or your choice of over 500 mixed to order colours.

Some variants are non-returnable.

Product Type

Paint

Finish

Matt

Approx. Drying Time (recoat)

16-24

Suitable Surfaces

Concrete, Masonry, Brickwork, Walls (Exterior).

Coverage

Approximately 6 square metres per litre, per coat.

General No. of Coats

1-2

Application

brush or roller.

Application Instructions

Seal absorbent surfaces with a coat of stabilising solution. Paint must be stirred well before use and applied using a brush or roller. If using more than one can of colour in the same area, mix the cans before use. Do not apply in temperatures below -5°C.

Cleaning

Immediately after use, clean equipment with White Spirit or Turpentine Substitute.

Storage

Do not use or store in extremes of temperature and protect from frost.

Disposal

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

Features