Up to approximately 7m2 per litre, per coat, depending upon the nature and absorbency of the surface being painted. 

Paint must be stirred well before use and applied using a brush or roller. Do not apply in temperatures below 10°C or in damp conditions.

• If the radiator has recently been in use, ensure it has cooled entirely before beginning.
• To get the best finish, rub down the radiator with sandpaper and remove all dust and debris afterwards.
• If you are painting a bare radiator, use Hammerite Special Metals Primer on the bare metal.
• Depending on your preference, the radiator can be painted whilst on or off the wall. If it is being painted whilst on the wall, ensure that the wall behind and floor underneath are fully covered.
• Take care not to paint over any valves or knobs in case you accidentally seal them with the paint.
• Once you have applied the paint with a good quality brush, leave it to dry thoroughly for a few days before turning the radiator on to harden the surface.

Immediately after use, clean equipment with good quality brush cleaner such as Hammerite Brush Cleaner and Thinners.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Resistant to heat
• Available in gloss or satin finish
• Tough and durable
• Long lasting