Up to 10m2 per litre per coat. Use Weathershield Preservative Primer+ on bare timber before use.

• Apply using a good quality synthetic bristle paint brush for best results.
• Before using this product ensure all surfaces to be painted are clean (no dirt, grease, rust or flaking paint) and dry.
• Areas affected by mould, algae or fungi should be treated with an appropriate fungicidal wash.
• Sand down the surface to remove any sheen.
• On new galvanized surfaces, allow to weather for six months before application.
• New bare wood To ensure 6 year weather protection is achieved, prepare bare wood with Weathershield Exterior Preservative Primer+ (BP), wiping off any excess.
• For uPVC Apply direct to clean substrate.

TIP: Apply Dulux Weathershield Multisurface only in dry conditions, above 10°C and when bad weather is not forecast. The use of light colours only, particularly on south facing elevations is recommended to avoid solar heat again damaging the Upvc.

Clean brushes and equipment with clean water after use.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Exterior use
• For UPVC, wood and metal
• Satin finish
• Water based