Estimate Coverage: 10m² per litre

Preparation:

• All surfaces should be clean, dry, sound and free from contaminants.
• Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint.
• This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch.
• These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
• New concrete must be allowed to cure thoroughly which can take up to 3 months.
• Tarmac - new tarmac needs several months to weather before painting.
• Very porous surfaces should be sealed with an acrylic primer sealer before applying line marking paint.
• Other surfaces have to be prepared and primed with the suitable primer for that substrate.
• Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced.
• Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Application:

• Mix well before use.
• As dictated by normal good painting practice.
• In confined spaces, provide adequate ventilation during application and drying. 

Use Thinners 18 or low odour white spirit for cleaning.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Good for indoor and outdoor
• Fast drying