Coverage approx 12sqmtrs p/ltr

Preparation:

• Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates.
• Bare steel should be free from dust, rust and scale.
• Blast cleaning to SA 2½ is recommended.
• If blast cleaning is impractical, mechanical cleaning should be employed as hand cleaning does not clean the steel to the required degree.
• Any oil or grease should be removed with CooVar Universal Degreaser before de-rusting.
• Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts, welds etc. Welds should, if necessary be ground and all weld spatter, slag etc. must be removed.

Application:

• Mix well before use.
• Do not paint when temperature will be at 7°C or below during the painting and drying process.
• As dictated by normal good painting practice.
• Care must be taken during application that the temperature is above the dew point to avoid any contamination.
• In confined spaces, provide adequate ventilation during application and drying.

Clean equipment with water.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Suitable for most metals
• Anti-corrosive properties
• Water based