Approximately 9-11 sq meters/litre per coat 

• After the cracks have been treated two or three coats of Extra Flex should then be applied over the complete area.
• Apply by brush, roller, conventional H.V.L.P or airless spray.
• Stir well and check colour before use.
• Do not apply at air or surface temperatures below 10°C or when likely to be foggy or rain before the paint has fully dried.
• On sealed surfaces apply two to three coats, allowing each coat to dry thoroughly.
• Do not over spread.

• Clean up immediately after use with warm soapy water.
• Remove as much product as possible prior to cleaning.

Do not use or store in extremes of temperature and protect from frost.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

• Stretches up to 400%
• Smooth finish
• Long lasting
• Microporous
• Flexible
• Fine crack bridging
• Apply with brush, roller or spray
• Water-based 
• Quick drying