Approximately 13² per litre

(depending on the nature and porosity of the surface. Strong or contrasting colours may require additional coats.)

Preparation:

• Ensure surface to be painted is sound, clean, dry and free from grease.
• Rub down bare timber surfaces with fine waterproof abrasive paper to remove raised grain and sharp edges.
• Apply Knotting Solution to knots and resinous surfaces.
• Rub down sound previously gloss painted surfaces with fine waterproof abrasive paper to provide a key.
• Avoid the inhalation of dust.
• Wear a suitable face mask if dry sanding.
• Prime where required with the appropriate Leyland Primer.
• Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.
• Allow radiators to cool before painting.

Application:

• Stir well before use.
• Apply by brush or roller.
• Apply liberally, brushing firmly into the surface.
• Treat all accessible timber, in particular the end grain.
• Allow 1-2 hours before applying a second coat if required.
• Conditions of low temperature or high humidity can prolong the drying time.
• Do not apply when air or surface temperature is below 10°C or externally when rain is imminent.

Remove as much product as possible from application equipment before cleaning. Clean equipment immediately after use in warm soapy water and rinse thoroughly.

Do not use or store in extremes of temperature and protect from frost. To avoid the risk of spillage, always store and transport in a secure upright position.

When the product container is empty please ask us about recycling. If you have leftover product, please dispose of it responsibly. PAINT Direct believe by working with our customers we can reduce waste and do more with the resources we have and together can create a better future for our planet.

Do not empty product into drains or watercourses.

• Non-yellowing and low odour        
• High opacity, so comes with brilliant hiding power                                                      
• Suitable for wood and metal work
• Works specifically with Fast Drying Gloss and Satin!